The solution is developed in accordance with current fire safety regulations
Requirements for equipping buildings with fire extinguishing and alarm systems
Design standards for fire extinguishing installations
Requirements for fire alarm and control systems
Technical regulations on fire safety requirements
Requirements for fire-fighting equipment and its certification
A set of documents required for system design, approval, and implementation at the facility
Typical equipment layout and connection schemes based on planning, rack systems, and regulatory requirements.
Типовое размещение подвесных модулей на плане склада
При наличии на складе стеллажей модули размещаются над проходом между ними для лучшего орошения внутристеллажного пространства
Типовая схема подключения устройства контроля срабатывания (индуктивного датчика) к шлейфу АПС с питанием
Типовая схема подключения устройства контроля срабатывания (реле давления) к входу типа «сухой контакт»
Типовая схема подключения устройства электропуска (толкателя) к прибору автоматической пожарной сигнализации
Схема размещения оросителей и МУПТВ
Аксонометрическая схема прокладки трубопровода от модуля до оросителей
Модуль пневмоуправления. Вариант 1
Модуль пневмоуправления. Вариант 2
Распылители с коэффициентом производительности —0,025-0,03
Распылители с коэффициентом производительности —0,07-0,077
Типовая схема подключения устройства электропуска (толкателя) к прибору автоматической пожарной сигнализации
Типовая схема подключения устройства контроля срабатывания (индуктивного датчика) к шлейфу АПС с питанием
The warehouse solution is formed around facility characteristics, storage type, and regulatory requirements.
Equipment is placed according to warehouse planning and protects storage zones, including in-rack spaces.
Different fire suppression and detection system types are used depending on facility operating conditions.
The system integrates with automatic fire alarm systems and other fire protection elements.
The solution is adapted for a specific warehouse and protects different storage and working zones.
The BONTEL suspended fire suppression module is a versatile fire safety device in the form of a compact cylinder with a spray nozzle, filled with the BONTEL fire extinguishing agent under pressure.
The modules are installed either locally, above the protected area, or throughout a room. Thanks to their small size, they can also be installed above a suspended ceiling, leaving only the nozzle visible from below.
BONTEL fire extinguishers are highly effective and can tackle both fires involving tricky smouldering materials, such as rubber, and those involving flammable liquids, such as petrol and diesel fuel.
BONTEL fire extinguishers are available in standard and special versions, for use in hostile environments as well as in mines.
-Photoroom.png)
The BONTEL gas fire suppression unit is an innovative gas fire suppression device designed for installation in distribution boards, electrical cabinets, server and telecommunication racks, etc., and protecting them from fire. Highly effective gas fire suppression unit capable of extinguishing a fire at its early stage—before it spreads beyond the locally protected area and without damaging the equipment.
A high-performance fire suppression system filled with the BONTEL fire extinguishing agent and designed to protect industrial and utility facilities and for use in vehicles and everyday situations, this will put out Class A (Solid combustibles), Class B (Flammable liquids), Class C (Flammable gas) and Class E (Energized electrical equipment) fires.
.png)
The LEVEL BONTEL fiber optic sensing system is a firefighting device with the functions of storing information on the condition of the protected object. The use of such a fiber optic sensing system allows you to control the temperature parameters of the environment, changes in which can lead to fires, as well as to develop action algorithms to prevent fires.
The LEVEL BONTEL a fiber optic sensing system is compatible with absolutely any fire automation system and also enables connection of up to 8 channels with total length of up to 40 km.
Due to its unique properties, LEVEL BONTEL can be used both instead of smoke and heat detectors in fire alarm systems and instead of fire extinguishing installations at various facilities, when developing STS and the corresponding compensating measures.
.gif)
AFSU-WM "BONTEL" is designed for comprehensive protection (as a fire extinguishing system and internal fire water supply) in buildings, as well as in cable structures, transport tunnels, subways, gas stations, aircraft hangars, parking lots, power transformers, in the underground workings of mines and mines and in their surface structures.
