Regulatory base
The solution is developed in accordance with current fire safety regulations
Server and technical rooms
03
- Comply with codes and standards
- Ready to implement
- Include schemes and documentation
Regulatory base and documentation
Documentation
A set of documents required for system design, approval, and implementation at the facility
Schemes and visual materials
Typical equipment layout and connection schemes based on planning, rack systems, and regulatory requirements.
.png)
Типовые схемы подключения подвесных модулей к сторонним системам
Типовая схема подключения устройства контроля срабатывания (реле давления) к входу типа «сухой контакт»
.png)
Типовые схемы подключения подвесных модулей к сторонним системам
Типовая схема подключения устройства электропуска (толкателя) к прибору автоматической пожарной сигнализации
.png)
Типовые схемы подключения СГП к сторонним системам
Типовая схема подключения устройства электропуска (толкателя) к прибору автоматической пожарной сигнализации
.png)
Типовые схемы подключения СГП к сторонним системам
Типовая схема подключения устройства контроля срабатывания (индуктивного датчика) к шлейфу АПС с питанием
Рекомендуемая схема прокладывания полиамидной трубки по объёму шкафа
Вариант прокладывания полиамидной трубки для ряда шкафов
Рекомендуемая схема прокладывания полиамидной трубки по объёму шкафа
Вариант прокладывания полиамидной трубки для одного шкафа
Implementation description
The warehouse solution is formed around facility characteristics, storage type, and regulatory requirements.
-
01
Equipment placement
Equipment is placed according to warehouse planning and protects storage zones, including in-rack spaces.
-
02
System type
Different fire suppression and detection system types are used depending on facility operating conditions.
-
03
Connection and control
The system integrates with automatic fire alarm systems and other fire protection elements.
-
04
On-site application
The solution is adapted for a specific warehouse and protects different storage and working zones.
Equipment in the solution
Suspended fire suppression module
The BONTEL suspended fire suppression module is a versatile fire safety device in the form of a compact cylinder with a spray nozzle, filled with the BONTEL fire extinguishing agent under pressure.
The modules are installed either locally, above the protected area, or throughout a room. Thanks to their small size, they can also be installed above a suspended ceiling, leaving only the nozzle visible from below.
Fire extinguisher
BONTEL fire extinguishers are highly effective and can tackle both fires involving tricky smouldering materials, such as rubber, and those involving flammable liquids, such as petrol and diesel fuel.
BONTEL fire extinguishers are available in standard and special versions, for use in hostile environments as well as in mines.
-Photoroom.png)
Automatic fire suppression unit
A high-performance fire extinguishing unit filled with BONTEL fire extinguishing agent, for use against Class A (Solid combustibles), B (Flammable liquids), C (Flammable gas) and E (Energized electrical equipment) fires.
-Photoroom.png)
GFSU
The BONTEL gas fire suppression unit is an innovative gas fire suppression device designed for installation in distribution boards, electrical cabinets, server and telecommunication racks, etc., and protecting them from fire. Highly effective gas fire suppression unit capable of extinguishing a fire at its early stage—before it spreads beyond the locally protected area and without damaging the equipment.
To select a project solution, leave a request and we will contact you to clarify the facility parameters and prepare a preliminary estimate. Or contact us directly by hotline: +7 (499) 322-21-12